BT3012 A.T.I. 30 Litre Enamel Lined Calorifier, 320.. Diameter
The Italian manufactured ATI Calorifier, or boat water heater, is an efficient method of heating water on your boat. The calorifier produces hot water from the mains 220v/110v or engine's cooling system, to feed into the hot water system. It can also be used with wet sourced heating systems.
These have been designed for use in the marine environment, primarily boats and yachts. They can also be used in specialist domestic and mobile applications.
Features:
- heat insulation by means of closed cell expanded polyurethane foam (HFC, CFC, HCFC and HFA free)
- electrical heating elements are available in Incoloy at 550, 850 and 1250 W allowing hot water production when engine heat is not available
- adjustable safety thermostat
- pressure relief and non-return valve
- power supply cable as standard
- Enamelled steel tank, internally coated according to DIN 4753
- enamelled heat exchanger: thanks to its large surface it can produce a large output of hot water
- the external casing is made of pre painted aluminium, chosen because of its suitability for marine applications
- AISI 304 stainless steel mounting brackets
- magnesium anode: it protects the tank against galvanic corrosion
- drain cock
| Code | BT3012 | |
|---|---|---|
| Power | w A |
1250 5,4 |
| Capacity | lt gal |
30 8,0 |
| Empty Weight | Kg lb |
11,5 25 |
| Max Pressure | kPa psi |
700 102 |
| Electric Supply | V - Hz | 230 V ∼ 50 Hz (120 V on demand) |
|
Water Connections |
inch | 1/2" |
| Dimensions A | mm inch |
320 12,6 |
| Dimensions B | mm inch |
625 24,6 |
| Dimensions C | mm inch |
334 13,1 |
| Packaging Size | cm inch |
36 x 36 x 69 14,2 x 14,2 x 27,2 |
| Packaging weight | Kg lb |
16,0 35,0 |
