FTS89222 Force 10 Small Stainless Steel Burner Cap – SABAF Series II (2000–2011)

Replacement small stainless steel burner cap for Force 10 marine cookers fitted with SABAF Series II hob burners.

Force 10 part 89222 is the small burner cap used on compatible Force 10 cookers from the SABAF Series II generation, generally found on appliances manufactured during the 2000–2011 period.

The stainless steel cap fits over the small hob burner flame spreader and is secured using the characteristic two-screw SABAF Series II mounting arrangement.

Penguin Engineering SKU: FTS89222
Force 10 part number: 89222
Burner size: Small
Material: Stainless steel
Burner type: SABAF Series II – 2-bolt / 2-screw

Replacement Small Burner Cap for Force 10 Cookers

The Force 10 89222 small burner cap is designed to replace a damaged, corroded or missing burner cap on compatible Force 10 marine cookers fitted with the older SABAF Series II burner system.

The burner cap sits at the top of the hob burner assembly and works together with the flame spreader and burner body to produce the correct burner flame.

If your existing stainless steel burner cap has become badly damaged, distorted or is missing, replacing it can help restore the original burner assembly without replacing the complete cooker.

Key Features

• Replacement Force 10 small hob burner cap

• Genuine Force 10 part number 89222

• Penguin Engineering SKU FTS89222

• Manufactured from stainless steel

• For small SABAF Series II burners

• Two-screw / 2-bolt mounting arrangement

• Suitable for compatible older Force 10 marine cookers

• Ideal for yacht and boat cooker repair and refurbishment

How to Identify a SABAF Series II Burner

Force 10 has used several different hob burner designs over the years, so identifying your existing burner is important before ordering.

The SABAF Series II burner used with part 89222 has two small screws passing through the burner cap.

This provides a useful visual way of distinguishing it from both earlier and later Force 10 burner designs.

If your existing small burner cap is retained by two small screws, this is a strong indication that your cooker uses the SABAF Series II burner system.

Suitable for Force 10 Cookers from Approximately 2000–2011

Force 10 SABAF Series II burners were used on a range of marine cookers produced during the 2000s.

This burner cap is therefore particularly relevant for owners maintaining older Force 10 cookers rather than the current SABAF Series III design.

Because production changes can overlap, we recommend identifying the burner type rather than relying solely on the age of the cooker.

SABAF Series II vs SABAF Series III

This 89222 stainless steel burner cap is for the older SABAF Series II burner system.

It should not be confused with the later small SABAF Series III burner cap.

The later SABAF Series III arrangement uses different burner components, including the Force 10 60031 small burner cap, and the parts are not necessarily interchangeable.

Always check your existing burner design before ordering.

When Should a Force 10 Burner Cap Be Replaced?

A replacement may be required if the existing burner cap has become:

• Badly corroded

• Damaged or cracked

• Distorted

• Missing

• Incorrectly fitted following a previous repair

• No longer seating correctly on the burner assembly

Before replacing the burner cap because of poor burner performance, it is also worth checking that the flame spreader, burner body and gas jet are clean and in good condition.

Compatibility – Please Check Before Ordering

This product is designed for the small Force 10 SABAF Series II hob burner using the two-screw burner cap arrangement.

Force 10 produced many different cooker sizes and configurations during this period, so compatibility should be based primarily on the burner design.

If you are unsure whether Force 10 89222 / FTS89222 is correct for your appliance, please contact Penguin Engineering with:

• Force 10 cooker model

• Serial number or identification plate details

• Approximate year of manufacture

• Photograph of the complete cooker

• Close-up photograph of the existing burner

• Photograph showing how the burner cap is attached

We can then help identify the correct replacement burner components.

Other SABAF Series II Burner Parts

The complete small SABAF Series II burner assembly uses several separate components.

Depending on what is damaged or missing, you may also require:

• Small burner flame spreader

• Small burner body

• Burner cap fixing screws

• Burner mounting studs

• Gas jet / burner orifice

• Thermocouple

• Ignition electrode

• Burner gasket

Check the individual components carefully before ordering to determine which parts actually require replacement.

Force 10 Cooker Spares from Penguin Engineering

Penguin Engineering supplies a wide range of Force 10 marine cooker spare parts for both current and older appliances.

Our Force 10 spares range includes burner caps, flame spreaders, burner bodies, retrofit kits, gas valves, thermocouples, ignition components, oven parts and cooker accessories.

If you are repairing an older Force 10 cooker and cannot identify the correct part, contact us with your cooker details and photographs and we can help identify the appropriate replacement components.

SEO Meta Title

Force 10 89222 Small Stainless Burner Cap | SABAF II

Meta Description

Force 10 89222 small stainless steel burner cap for compatible SABAF Series II marine cookers from around 2000–2011. Two-screw replacement burner cap.

Suggested SEO URL

/force-10-89222-small-burner-cap-sabaf-series-2/

Primary SEO Keyword

Force 10 89222 burner cap

Secondary SEO Keywords

• Force 10 small burner cap

• Force 10 stainless steel burner cap

• Force 10 SABAF Series II

• Force 10 SABAF 2 burner

• Force 10 89222

• FTS89222

• Force 10 cooker burner parts

• Force 10 cooker spares

• Force 10 hob burner cap

• marine cooker burner cap

• older Force 10 cooker spares