Cylinder and brackets: anodized light alloy. Piston: stainless steel dia 25 mm.
Designed for use in marine and other environments.
- Strut capable of a remarkable push, therefore suitable for a hard work.
- The push only version allows to lift the struts by hand in case of lack of power or breakdown.
- The installation as a pair is possible when the load is identical for both struts.
- Supplied with an electronic control box for each strut to control, protect against the overloads and 1.30 m power cable.
- It's necessary to add a 3 positions switch that will automatically return to OFF state.
- An acoustic/flashing movement warning is available on request.
- Available for 12 or 24V DC power.
450 KG THRUST: Struts designed to lift heavy loads, where the installation in pairs is impossible or the point and/or the angle of thrust are unfavourable.
ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Optional extension cable of 2 - 5 or 8 m.
Available with strokes from 50 to 1000 mm.
| Articolo Item |
Installazione Mounting |
Effetto Push |
Sincro Synchro |
Corsa Stroke |
Volt | Peso Weight |
Codice Code |
| 4D4704/12 | doppio effetto / push-pull | 470 mm | 12 V | 5,3 Kg | cod. 09.82.04701 | ||
| 4D4704/24 | doppio effetto / push-pull | 470 mm | 24 V | 5,3 Kg | cod. 09.82.04702 | ||
| ES4D4704/2/12 | coppia / pair | doppio effetto / push-pull | encoder | 470 mm | 12 V | 10,6 Kg | cod. 09.83.04705 |
| ES4D4704/2/24 | coppia / pair | doppio effetto / push-pull | encoder | 470 mm | 24 V | 10,6 Kg | cod. 09.83.04706 |
