FTS89013 Force 10 89013 Small Burner Retrofit Kit – Pre-2000 Cookers
Restore an older Force 10 marine cooker with the Force 10 89013 Small Burner Retrofit Kit, designed to replace one original small top burner on compatible pre-2000 Force 10 gas cookers.
This complete retrofit kit converts the older burner arrangement to the later stainless steel burner design, providing a practical solution where individual components for early Force 10 burners are no longer available.
Penguin Engineering SKU: FTS89013
Force 10 part number: 89013 / F89013
Burner size: Small – approximately 2 inch diameter
Application: Compatible older Force 10 marine cookers
Force 10 Small Burner Replacement Kit
The Force 10 89013 burner retrofit kit has been developed specifically for owners repairing older Force 10 marine cookers.
Rather than replacing just the burner cap or flame spreader, the kit replaces the complete old-style small hob burner assembly with a newer stainless steel burner system.
This provides a useful way of extending the working life of an otherwise serviceable Force 10 cooker without replacing the complete appliance.
Key Features
-
Complete Force 10 small burner retrofit kit
-
Force 10 part number 89013
-
Penguin Engineering SKU FTS89013
-
Designed for older Force 10 marine cookers
-
For the small approximately 2-inch hob burner
-
Replaces one complete old-style top burner
-
Upgrades to a newer stainless steel burner assembly
-
Includes key ignition and flame-failure components
-
Suitable for yacht and boat cooker repair
-
Ideal for refurbishment of older Force 10 appliances
What's Included?
The Force 10 89013 retrofit kit is supplied as a complete burner conversion rather than simply a replacement burner cap.
The kit typically includes:
-
Stainless steel burner assembly
-
Thermocouple
-
Ignition spark plug / electrode
-
Copper gas feed line
-
Installation hardware
-
Installation instructions
This allows several obsolete older burner components to be replaced as part of one conversion.
Designed for Older Force 10 Cookers
The 89013 kit is designed for Force 10 cookers manufactured before approximately 2000.
These older appliances used a burner arrangement for which many individual replacement components are no longer readily available.
The retrofit kit provides a way of replacing the complete small hob burner with the later Force 10 burner design.
Some Force 10 technical references identify the applicable production period more specifically as approximately 1987 to mid-2000.
Because Force 10 burner designs changed during production, we recommend identifying your existing burner and cooker serial number rather than relying solely on the cooker age.
Important Compatibility Check
This kit will NOT fit every older Force 10 burner.
If your existing burner cap is held in place by two small screws passing through the burner cap, the Force 10 89013 retrofit kit is not suitable.
This is an important visual check to make before ordering.
If your cooker has the two-screw burner-cap arrangement, please contact Penguin Engineering so we can help identify the correct burner parts for your appliance.
Small or Large Burner?
Force 10 produced two different retrofit kits for older top burners.
The 89013 is for the small burner, approximately 2 inches in diameter.
If you need to replace the larger approximately 4-inch burner, you require the corresponding Force 10 89012 Large Burner Retrofit Kit.
Measure or photograph your existing burner before ordering if you are unsure which version you require.
When Is a Burner Retrofit Kit Required?
A complete retrofit kit can be particularly useful when an older Force 10 burner has problems such as:
-
Damaged or corroded burner components
-
Failed thermocouple
-
Damaged ignition electrode
-
Obsolete burner cap
-
Deteriorated burner body
-
Damaged gas feed components
-
Multiple worn burner parts
For older Force 10 cookers, replacing the complete burner assembly may be more practical than trying to source several discontinued individual components.
Compatibility – Please Check Before Ordering
Force 10 has used several different burner designs over the years.
Before ordering FTS89013 / Force 10 89013, we recommend checking:
-
Cooker model number
-
Cooker serial number
-
Approximate manufacturing date
-
Diameter of the existing burner
-
Burner cap mounting arrangement
-
Whether two screws pass through the existing burner cap
If you are unsure, send Penguin Engineering photographs of the cooker identification plate and existing burner and we can help identify the correct replacement parts.
Force 10 Marine Cooker Spares
Penguin Engineering supplies a comprehensive range of Force 10 cooker spare parts for both current and older marine appliances.
Available Force 10 spares include:
-
Small and large burner retrofit kits
-
Burner caps
-
Flame spreaders
-
Burner cups
-
Gas jets
-
Thermocouples
-
Ignition electrodes
-
Gas valves
-
Oven burners
-
Oven racks and shelves
-
Control knobs
-
Installation accessories
If you are restoring an older Force 10 cooker, contact us if you need help identifying the parts required.
Force 10 Spares from Penguin Engineering
Penguin Engineering is the UK distributor for Force 10 marine cookers and supplies an extensive range of cooker spares and replacement components.
Keeping replacement components available can help owners, marine engineers and boatyards maintain existing Force 10 installations rather than replacing an otherwise serviceable cooker.
SEO Meta Title
Force 10 89013 Small Burner Retrofit Kit | Pre-2000
Meta Description
Force 10 89013 small burner retrofit kit for compatible pre-2000 marine cookers. Complete 2-inch stainless steel burner replacement and conversion kit.
Suggested SEO URL
/force-10-89013-small-burner-retrofit-kit-pre-2000/
Primary SEO Keyword
Force 10 89013 burner retrofit kit
Secondary SEO Keywords
-
Force 10 small burner retrofit kit
-
Force 10 89013
-
FTS89013
-
Force 10 burner replacement
-
Force 10 pre-2000 burner
-
Force 10 cooker burner
-
Force 10 old cooker spares
-
Force 10 stainless steel burner
-
Force 10 marine cooker spares
-
marine cooker burner replacement